Blood, Sweat, and Sawdust

Going against the grain

Tag: table saw

Dovetails on the Table Saw?

I’m currently building a Mike Pekovich inspired tool cabinet.  Mike built his cabinet for a Find Woodworking video series.  In the video series, Mike uses a custom ground blade to cut his dovetails on the table saw.  The idea is brilliant.  Tails are dead square, and you zip through them with lightning speed.  Additionally, the kerf of your table saw blade is the only thing that limits the size of your pins.  And because you only have to layout the tails on one board, you save a load of time on layout.

Consequently, I remembered meeting an associate from Ridge Carbide Tool at a recent woodworking show.  Like Forrest, they make various saw blades right here in the United States.  So, I checked out their website, and discovered they made dovetail table saw blades.  I placed an order, and was pleasantly surprised when the saw blade arrived just a few days later.

I purchased an 8-degree blade for left-hand tilt saws, but Ridge provides many other options.  They grind the bevel on one side, so you’re able to get deep into the corners of your tail boards.  This reduces that amount of paring required.  Additionally, the blade seems very well made.

Using the blade is simple.  Mark your pins.  Then, adjust the angle of your table saw to match the angle of your blade.  Next, adjust the height of the blade to baseline of your tail boards.  Finally, make a few test cuts, and cut your tails.  I like narrow pins, so I just align the blade to the center of the pin mark.  Then, I flip the board and align the kerf in the tail board to the kerf in my auxiliary sled.

Since I made an auxiliary fence specifically for tails, I mark the location of each pin on the fence.  I use the mark as a reference for the rest of my boards.  This keeps me from having to mark my pins of every board.

At the moment, I still cut my pins by hand.  However, that may soon change.  I am very happy with the Ridge Carbide’s product and the process of cutting dovetails on the table saw.


My First Cabinet Saw


I never thought I’d own a table saw.  I thought they were dangerous.  I thought they were for people who lacked the finesse to master hand tools.  It turns out, there’s so much you can do on a table saw that you can’t do with another tool.

I struggled between the European style sliders and the SawStop.  I decided on the Saw Stop Professional Cabinet Saw with 36″ table.  You can’t beat the European sliding table saws for accuracy and versatility.  However, the Saw Stop is better for me in terms of budget, size, safety, and available support.

That said, the Saw Stop is an excellent cabinet saw.  Assembly is straight forward (the manual is likely the best I’ve ever seen).  The fit and finish are superb.  The mobile base is easy to use.  So far, there’s nothing not to like.  I will give a more in-depth review after I’ve used the saw for a few months.  I’ve only made a few test cuts, but they were square and clean, even with the stock blade (I have a Forrest Woodworker II to try out later).  I also have a dado set on the way.

Stay tuned.  I will have a quick video of the Minimax FS30 in use very soon.